The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4.
In the SYSTEM INFO menu Switch Name field, enter a new name for the switch.
5. Click the APPLY button.
Your settings are saved.
View system information
You can view basic information about the switch, such as the firmware version, switch
name, MAC address, serial number, and model number. You can also view or edit the
language, or check for firmware updates.
To view basic information about the switch:
1.
Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
Date and time settings
You can set the system time manually, or enable Simple Network Time Protocol (SNTP)
to allow the switch to automatically synchronize its internal clock with the time provided
by an SNTP server.
If you want to automate SNTP time syncing, you must configure the SNTP client mode,
configure one or more SNTP servers, and then enable system time syncing.
User Manual84Maintain and Monitor the Switch
8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
To Next Page
Loading...
