Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the back of the router for up to 30 seconds
or until the Power LED starts blinking amber. The router resets and returns to the factory
configuration settings shown in the following table.
Table 3. Router factory default settings
Default SettingFeature
www.routerlogin.net or www.routerlogin.comUser login URLRouter login
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Use default hardware addressWAN MAC addressInternet
connection
1500WAN MTU size
AutosensingPort speed
192.168.1.1LAN IP addressLocal network
(LAN)
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
DisabledTime adjusted for daylight saving
time
Disabled (except traffic on port 80, the HTTP port)Inbound (communications
coming in from the Internet)
Firewall
Enabled (all)Outbound (communications
going out to the Internet)
DisabledSource MAC filtering
User Manual220Supplemental Information
Nighthawk AD7200 Gaming Router Model XR700
To Next Page
Loading...
Need help?
General
