NETGEAR Nighthawk AD7200 User Manual

-
RxPkts. The number of packets received on this port since reset or manual
clear.
-
Collisions. The number of collisions on this port since reset or manual clear.
-
Tx B/s. The current transmission (outbound) bandwidth used on the WAN
and LAN ports.
-
Rx B/s. The current reception (inbound) bandwidth used on the WAN and
LAN ports.
- Up Time. The time elapsed since this port acquired the link.
- Poll Interval. The interval at which the statistics are updated on this page.
5.
To change the polling frequency, enter a time in seconds in the Poll Interval field
and click the Set Interval button.
6. To stop the polling entirely, click the Stop button.
Check the Internet Connection Status, View
Details, and Release and Renew the
Connection
To check the Internet connection status if the router is connected to a WAN Ethernet
connection and view details about the connection:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The Dashboard displays.
4. Click Settings > Monitoring > Connection Status.
The Connection Status page displays. The information that shows on the page
depends on the type of WAN Ethernet interface connection for the router. For the
User Manual139Maintain the Router
Nighthawk AD7200 Gaming Router Model XR700

NETGEAR Nighthawk AD7200 Specifications

General

Brand	NETGEAR
Model	Nighthawk AD7200
Category	Network Router
Language	English