NETGEAR Nighthawk RS300 - Set Your Time Zone and Daylight Saving Time

•
Use the default NETGEAR NTP server: Use the preset NETGEAR NTP server.
•
Set your preferred NTP server: Enter the name or IP address of your preferred
server.
6. If you select the Set your preferred NTP server radio button, enter the NTP server
domain name or IP address in the field below the radio button.
7. Click the Apply button.
Your settings are saved.
Set your time zone and daylight
saving time
To set your time zone and daylight saving time:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > NTP Settings.
The NTP Settings page displays.
5. Select your time zone from the menu.
6. If you live in a region that observes daylight saving time, select the Automatically
adjust for daylight savings time check box.
7. Click the Apply button.
Your settings are saved.
User Manual130Manage and Monitor Your
Router
Nighthawk WiFi 7 Tri-Band Router Model RS300, Model RS280