•
C. Gigabit Ethernet LAN ports: Two Gigabit Ethernet RJ-45 LAN ports that support
1G, 100M, and 10M speed. Use these ports to connect Ethernet LAN devices to your
router.
The router supports port aggregation:
○
LAN aggregation: Use Ethernet LAN ports 1 and 2 to set up a port aggregation
link to a LAN device that also supports Ethernet LAN port aggregation. For more
information, see Manage Ethernet LAN port aggregation to a LAN device on
page 99.
•
D. 2.5G LAN ports: Two RJ-45 LAN ports that support speeds up to 2.5 Gbps. Use
a Category 5e (Cat5e) Ethernet cable or higher rated Ethernet cable to connect the
router to a high-speed LAN server, LAN storage device, or another LAN device.
The router supports port aggregation:
○
Internet (WAN) aggregation: Use Ethernet LAN port 4 with the 2.5G Internet
port to set up a multi-gigabit Internet connection with port aggregation. For more
information, see Get multi-gigabit Internet with Internet port aggregation on
page 36.
NOTE: You can set up both LAN aggregation and Internet (WAN)
aggregation.
•
E. USB 3.0 port: Use the USB 3.0 port to connect a USB storage device to your
router.
•
F. 2.5G Internet port: An RJ-45 Internet port (marked with yellow) that supports
speeds up to 2.5 Gbps. Use a Category 5e (Cat5e) Ethernet cable or higher rated
Ethernet cable to connect a high-speed modem for a high-speed Internet connection.
For more information, see About high-speed Internet connections and Internet port
aggregation on page 35.
•
G. DC power connector: Connect the power adapter that came in your product
package to the DC power connector.
Router label
The router label shows the login information, WiFi Network Name (SSID), network key
(password), serial number, and MAC address.
User Manual17Hardware Setup
Nighthawk WiFi 7 Tri-Band Router Model RS300, Model RS280
To Next Page
Loading...
