•
0.4 Gbps: Allows WiFi devices to join the 5 GHz radio of the network and function
at up to 400 Mbps (0.4 Gbps), depending on the WiFi standard that they support.
•
0.7 Gbps: Allows WiFi devices to join the 5 GHz radio of the network and function
at up to 700 Mbps (0.7 Gbps), depending on the WiFi standard that they support.
•
1.5 Gbps. Allows WiFi devices to join the 5 GHz radio of the network and function
at up to 1.5 Gbps, depending on the WiFi standard that they support.
•
2.9 Gbps: Allows WiFi devices to join the 5 GHz radio of the network and function
at up to 2.9 Gbps, depending on the WiFi standard that they support. This mode
is the default mode for the 5 GHz radio.
7. In the Wireless Network (6 GHz) section, select a WiFi mode from the Mode menu.
•
0.7 Gbps: Allows WiFi devices to join the 6 GHz radio of the network and function
at up to 700 Mbps (0.7 Gbps), depending on the WiFi standard that they support.
•
1.4 Gbps. Allows WiFi devices to join the 6 GHz radio of the network and function
at up to 1.4 Gbps, depending on the WiFi standard that they support.
•
2.9 Gbps: Allows WiFi devices to join the 6 GHz radio of the network and function
at up to 2.9 Gbps, depending on the WiFi standard that they support.
•
5.8 Gbps: Allows WiFi devices to join the 6 GHz radio of the network and function
at up to 5.8 Gbps, depending on the WiFi standard that they support. This mode
is the default mode for the 6 GHz radio.
8. Click the Apply button.
Your settings are saved.
Set up a guest WiFi network
A guest WiFi network allows visitors to use the Internet without using your WiFi security
password or with a different WiFi password. By default, the guest WiFi network is
disabled. You can enable and configure the guest WiFi network for each WiFi band.
The WiFi mode of the guest WiFi network depends on the WiFi mode of the main WiFi
network. For example, if you configure the WiFi mode for the main WiFi network as
0.7 Gbps in the 2.4 GHz band, the guest WiFi network also functions in the 0.7 Gbps
mode in the 2.4 GHz band. The channel also depends on the channel selection of the
main WiFi network.
By default, these networks are disabled. You can enable one or both guest networks.
You can also change the SSIDs for these networks.
User Manual75Manage WiFi Settings
Nighthawk WiFi 7 Tri-Band Router Model RS300, Model RS280
To Next Page
Loading...
