NETGEAR Nighthawk RS300 - Block Services from the Internet

The BASIC Home page displays.
4. Select ADVANCED > Security > Block Sites.
The Block Sites page displays.
5. Scroll down and select the Allow trusted IP address to visit blocked sites check
box.
6. In the Trusted IP Address field, enter the IP address of the trusted computer.
7. Click the Apply button.
Your settings are saved.
Block services from the Internet
You can block Internet services on your network based on the type of service. You can
block the services all the time or based on a schedule.
NOTE: Service blocking works only for services and applications that are using
Transmission Control Protocol (TCP) or User Datagram Protocol (UDP) for
communication.
To block services:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Services.
The Block Services page displays.
5. Select when to block the services:
•
Per Schedule: Turn on service blocking according to a schedule that you set.
For more information, see Schedule when to block Internet sites and services on
page 64.
•
Always: Turn on service blocking all the time, independent of the Schedule page.
6. Click the Add button.
The Block Services Setup page displays.
User Manual63Control Access to the Internet
Nighthawk WiFi 7 Tri-Band Router Model RS300, Model RS280