Firmware for the router and satellite
You can use the router web interface to check if new firmware is available and update
your router and satellite, or you can manually update the firmware for your router and
satellite.
Enable the automatic firmware update feature
You can let the router automatically update its firmware and the firmware for any Orbi
satellites on the network.
To enable the automatic firmware update feature:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 32.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Firmware Update.
The Firmware Update page displays.
5. In the Orbi Router Auto Firmware Update section, select the Enable radio button.
6. Click the Apply button.
Your settings are saved.
Check for firmware updates
To check for new firmware and update your router and satellite:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
User Manual146Manage and Monitor Your Orbi
Pro System
Orbi Pro WiFi 6 Mini Router Model SXR30 and Orbi Pro WiFi 6 Mini Satellite Model SXS30
To Next Page
Loading...
Need help?
General
