Sync an add-on Orbi Pro WiFi 6 Mini satellite
If you already set up an Orbi Pro WiFi 6 Mini router and satellite and you are adding an
optional add-on Orbi Pro WiFi 6 Mini satellite (sold separately), follow the steps in this
section.
Note: When you purchase an Orbi Pro WiFi 6 Mini satellite separately from the Orbi
Pro WiFi 6 Mini router, the satellite has a different WiFi network name and password.
However, after syncing the add-on satellite with the router, the satellite uses the same
WiFi network name and password as the router.
To sync your add-on Orbi Pro WiFi 6 Mini satellite:
1. Place your satellite.
For more information, see Place your Orbi Pro WiFi 6 Mini satellite on page 19.
2. Connect the satellite to a power source.
3.
Wait about two minutes for the satellite bar LED to light solid white.
4.
Press the Sync button on the back of the satellite and within two minutes, press the
Sync button on the back of your Orbi WiFi 6 Mini router.
The satellite bar LED pulses white, then lights one of the following colors for about
three minutes, and then turns off:
•
Blue: The router and satellite successfully synced, and the connection between
the router and satellite is good.
•
Amber: The router and satellite successfully synced, and the connection between
the router and satellite is fair. Consider moving the satellite closer to the router.
•
Magenta: The router and satellite failed to sync. Move the satellite closer to the
router and try again.
Note: The first time that you sync the satellite and the router, the sync process can
take up to five minutes because the router might automatically update the satellite’s
firmware.
User Manual21Overview and Setup
Orbi Pro WiFi 6 Mini Router Model SXR30 and Orbi Pro WiFi 6 Mini Satellite Model SXS30
To Next Page
Loading...
Need help?
General
