GS700TP Hardware Installation Guide
2-8 Physical Description
v1.0, January 2007
LED Designations
Port LEDs
The following table describes the port LED designations.
Table 2-1. Port LEDs
Port LED Designation
24/48-10/100/1000 Ports
- One LED/Port
SPD/Link/ACT LED • Solid Green - A valid 1000Mbps link is established
on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port at 1000Mbps.
• Solid Yellow - A valid 10/100Mbps link is
established on the port.
• Flashing Yellow - Packet transmission or
reception is occurring on the port at 10/100Mbps.
• Off - No 10/100Mbps link is established on the port.
PoE Mode • Solid Green - The PoE powered device (PD) is
connected and the port is supplying power
successfully.
• Solid Yellow - Indicates one of the following
failures resulted in stopping power to that port:
Short circuit on PoE power circuit.
PoE power demand exceeds available power.
PoE current exceeds PD's classification.
Out of proper voltage band (44 ~ 57 VDC).
• Off –No PoE powered device (PD) connected.
2/4-SFP Ports - One
LED/Port
SFP Link/ACT LED • Solid Green - A valid 1000Mbps SFP module link
is established on the port.
• Flashing Green - Packets transmission or
reception is occurring on the port at 1000Mbps.
• Solid Yellow - A valid 100Mbps SFP module link is
established on the port.
• Flashing Yellow - Packets transmission or
reception is occurring on the port at 100Mbps.
• Off - No SPD link is established on the port.
To Next Page
Loading...
