GS700TP Hardware Installation Guide
Physical Description 2-7
v1.0, January 2007
• Four SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.
• Reset button to restart the device.
• Recessed default reset button to restore the device back to the factory defaults.
• Port LEDs
• System LEDs
Figure 2-4 illustrates the NETGEAR GS748TP Smart Switch back panel:
Figure 2-4
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.
To Next Page
Loading...
