Need help?Do you have a question about the NETGEAR ProSAFE Plus Series and is the answer not in the manual?
General| Model | ProSAFE Plus Series |
|---|---|
| Category | Switch |
| VLAN Support | Yes |
| QoS | Yes |
| IGMP Snooping | Yes |
| Jumbo Frame Support | Yes |
| Switching Capacity | Varies by model |
| Forwarding Rate | Varies by model |
| MAC Address Table | Varies by model |
| Power Consumption | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Ports | Varies by model (e.g., 8, 16, 24, 48 ports) |
| Management | Web-based |
| PoE Support | Varies by model |
| Managed | Yes |
| Mounting | Rack-mountable |
Introduction of the XS708E, the industry's first affordable 10Gigabit switch for SMBs.
Steps and topology for testing Port Based VLAN functionality on the switch.
Steps and topology for testing 802.1Q VLAN functionality on the switch.
Procedure to test Port Based QoS, focusing on priority queue behavior and packet ratios.
Procedure to test 802.1p Based QoS with VLANs and priority levels.
Procedure to test Broadcast Filtering, verifying dropped broadcast packets.
To Next Page