NETGEAR ProSafe XS748T User Manual

Get Started
24
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
4. Configure the desired settings.
5. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
 To configure a single port:
1. Ensure that the page is displaying all ports, and not only the LAGs.
2. Select the check box for the port number.
The row for the selected interface is highlighted, and the interface number appears in the
heading row.
3. Configure the desired settings.
4. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
 To configure a single LAG:
1. Click the LAGS link or the All link to display the LAGs.
2. Select the check box for the LAG number.
The row for the selected interface is highlighted, and the interface number appears in the
heading row.
3. Configure the desired settings.
4. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
 To configure multiple ports:
1. Ensure that the page is displaying all ports, and not only the LAGs.
2. Select the check box for each port to configure.
The row for each selected interface is highlighted.
3. Configure the desired settings.

NETGEAR ProSafe XS748T Specifications

General

Brand	NETGEAR
Model	ProSafe XS748T
Category	Switch
Language	English