NETGEAR ProSafe XS748T User Manual

Monitor the System
315
ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual
802.3x Pause Frames
Received
A count of MAC control frames received on this interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
Total Packets Transmitted
(Octets)
The total number of octets of data (including those in bad packets) transmitted
on the network (excluding framing bits but including FCS octets). This object can
be used as a reasonable estimate of Ethernet utilization.
Total Packets Transmitted
Successfully
The number of frames that were transmitted by this port to its segment.
Unicast Packets Transmitted The total number of packets that higher-level protocols requested be transmitted
to a subnetwork-unicast address, including those that were discarded or not
sent.
Multicast Packets
Transmitted
The total number of packets that higher-level protocols requested be transmitted
to a multicast address, including those that were discarded or not sent.
Broadcast Packets
Transmitted
The total number of packets that higher-level protocols requested be transmitted
to the broadcast address, including those that were discarded or not sent.
Total Transmit Errors The sum of single, multiple, and excessive collisions.
Tx FCS Errors The total number of packets transmitted with a length (excluding framing bits,
but including FCS octets) between 64 and 1518 octets, inclusive, but with a bad
FCS with an integral number of octets.
Tx Oversized The total number of frames that exceeded the maximum permitted frame size.
The maximum increment rate of this counter is 815 counts per second at
10 Mb/s.
Total Transmit Packets
Discarded
The sum of single collision frames discarded, multiple collision frames
discarded, and excessive frames discarded.
Single Collision Frames A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by exactly one collision.
Multiple Collision Frames A count of the number of successfully transmitted frames on a particular
interface for which transmission is inhibited by more than one collision.
Excessive Collision Frames A count of frames for which transmission on a particular interface fails due to
excessive collisions.
802.3x Pause Frames
Transmitted
A count of MAC control frames transmitted on this interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
EAPOL Frames Received The number of valid EAPoL frames of any type that were received by this
authenticator.
EAPOL Frames Transmitted The number of EAPoL frames of any type that were transmitted by this
authenticator.
Table 66. Detailed port statistics (continued)
Field Description

NETGEAR ProSafe XS748T Specifications

General

Brand	NETGEAR
Model	ProSafe XS748T
Category	Switch
Language	English