Hardware Specifications and Default Settings
372
ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728T and XS748T
Password control access 1 Idle time-out is 10 minutes
The password is password
Management security 1 profile with 20 rules for
HTTP/HTTPS/SNMP access to
allow or deny an IP address or
subnet
All IP addresses allowed
Port MAC lock down All ports Disabled
Boot code update Boot code is automatically
updated together with firmware
upgrade.
N/A
DHCP/static IP 1 DHCP enabled/192.168.0.239
Default gateway 1 192.168.0.254
System name configuration 1 NULL
Configuration save/restore 1 N/A
Firmware upgrade 1 N/A
Factory default reset 1 (web and front-panel button) N/A
Dual image support 1 Enabled
Multisession web connections 5 Enabled
SNMPv1/V2c
SNMP v3
Maximum 5 community entries Disabled
Time control 1 (Local or SNTP) Local time enabled
LLDP/LLDP-MED All ports Enabled
Logging 4 (buffered flash, server & traps) Buffer log enabled
MIB Support 1 Enabled
Smart Control Center N/A Enabled
Statistics N/A N/A
IGMP snooping v1/v2/v3 All VLANs Disabled
IGMP Snooping Querier All VLANs Disabled
Configurations upload/download 1 N/A
EAPoL flooding All ports Disabled
BPDU flooding All ports Disabled
Multicast groups 512 Disabled
Table 73. Switch features and default settings (continued)
Feature Sets Supported Default Setting
To Next Page
Loading...
Need help?
General