NETGEAR PS121 User Manual

User Manual for the NETGEAR PS121 Mini Print Server
2-4 Introduction
Hardware Description
The Model PS121 Mini Print Server LEDs indicate the status of the server and the Ethernet traffic.
It has one 10/100 Mbps network port. The port operates in 10/100 Mbps when connected to a 10/
100Mbps Ethernet network. It has one USB port. It has a power adapter receptacle that accepts a
9V 500mA DC power adapter. It has a diagnostic/reset button.
As illustrated in the figure below, the PS121 Print Server has 2 LEDs.
Figure 2-2: Model PS121 Mini Print Server
Status Indicators
See the table below for a description of the LED indicator lights:
Table 2-1. LED Descriptions
ACT Status LED
(Green)
ERROR LED
(Amber)
Description
Off Off No power
On Off Idle normal operation
Flashing Off Normal operation transmitting or receiving data from the network.
On On Hardware error
Flashing Flashing Firmware upgrade in progress

NETGEAR PS121 Specifications

General

Brand	NETGEAR
Model	PS121
Category	Print Server
Language	English