Do you have a question about the NETGEAR PS101 and is the answer not in the manual?
Device Type | Print Server |
---|---|
Model | PS101 |
Connectivity Technology | Wired |
Data Link Protocol | Ethernet |
Networking Standards | IEEE 802.3 |
Data Transfer Rate | 10 Mbps |
Weight | 0.5 lbs |
Network Interface | Ethernet |
Supported Protocols | TCP/IP, IPX/SPX |
Status Indicators | Power |
Compliant Standards | CE |
Steps to prepare the physical installation site for the print server.
Lists items included in the print server package for verification.
Instructions for connecting network and printer cables to the print server.
Steps to confirm the print server is powered on and functional via LEDs.
Setting up TCP/IP configuration for the print server via web interface.
How to access the print server's web interface using a browser.
Overview of the web interface menus and specific configuration screens.
Detailed settings for the TCP/IP network protocol, including DHCP.
Settings for wireless network operation, including WEP encryption.
Displays current wireless connection status and performance metrics.
Status and configuration for the physical printer port on the print server.
Setting up virtual printers for advanced printing tasks like mode switching.
Procedures for rebooting and resetting the print server to default settings.
Steps for setting up printing from Windows systems, including hardware connection.
Guide to installing the print server software on PCs via CD-ROM.
How to configure PCs to detect and use the NETGEAR print server.
Process for adding a printer for Windows printing using the Add Printer Wizard.
Methods for obtaining a temporary IP address for the print server (DHCP, BootP, RARP, ARP).
Guide to using the Print Server Administration Program for configuration.
Detailed configuration options through tabs like System, TCP/IP, and Wireless.
Settings for device name and enabling/disabling network protocols.
Configuration of TCP/IP network settings like IP address and DHCP.