NetGear Print Server Manual
22
Printer Port
The Printer Port screen provides the status of the printer. See Figure 3-7.
Figure 3-7 Printer Port Screen
Printer Port
Connected
Printer
Shows the descriptive name for the new printer.
HandShake
Signal
This sets one of the communication parameters between this device and the printer.
The default is "Ack & Busy". Only change this to "Busy" if advised to do so by Technical Support.
Status
The current status of the printer (On-line, Off-line, Out of paper)
Print State
This will show either Idle or Printing.
Print Test
Page
Click on this button will print the print server status
To Next Page
Loading...
