NetGear Print Server Manual
77
7-2 Using Your Print Server in a NetWare 3.x Network
When configuring using the PSCONFIG utility, copy all files in \DOS directory on the Model
PS110/PS113 Print Server Resource CD to the hard disk of your workstation. The PSCONFIG
program is in this directory.
Setting PSERVER Mode in NetWare 3.x (Bindery Mode)
To set up the NetWare file server to connect to the Model PS110/PS113 print server in the NetWare
PSERVER mode, first designate a NetWare file server that your print server will log on to retrieve
print jobs. Log on to the file server as SUPERVISOR or as a user with SUPERVISOR privileges. The
print server can be configured to service multiple NetWare Bindery file servers as described in Chapter
8 “Using Advanced Functions”. However, one of the NetWare file servers has to be designated as the
master file server, and this file server is the one that must be configured and logged on to.
To set up the NetWare file server:
1. Execute the PCONSOLE program from the system volume of the file server.
2. Create queues.
To create queues:
a. Select Print Queue Information in the Available Options window.
b. Press the [Ins] key to add a new queue.
c. Type in a queue name and press [Enter].
d. Repeat steps b and c until you have the number of queues you want.
e. Press [Esc] to return to the PCONSOLE Main Menu.
3. Add the print server.
To inform the NetWare file server that a print server exists:
a. Select Print Server Information from the PCONSOLE Main Menu.
b. Press [Ins] to add a new print server.
c. Type the print server name.
The factory default name for the print server is PSxxxxxx (shown on the label on the bottom of the
device).
4. Assign printers.
To associate a NetWare printer object with each printer port of the print server:
a. Select the print server you added in step 3.
To Next Page
Loading...
Need help?
General
