NetGear Print Server Manual
1
Chapter 1 Introduction
• This chapter describes the features and the components of the PS100 series Print Sever.
o 1-1 is PS111W Wireless Ready Print Server
o 1-2 is PS110/PS113 2/3-Port Print Server
o 1-3 is PS101 Mini Print Server
1-1 PS111W Wireless Ready Print Server Features
NETGEAR PS111W print server offers:
• 802.11b standard wireless ready mobile flexibility, and also supports:
• Wired Equivalent Privacy (WEP) 40/64 or 128 bit encryption
• Open System and Shared key authentication
• Infrastructure, ad- hoc, and 802.11 ad- hoc communication modes
• Up to 11 channels or 13 channels*
* Depends on the country areas
• Print support - both wired and wireless simultaneously, when wireless set to ad hoc mode
• Support for multiple protocols (TCP/IP, NetBEUI, and Netbios)
• Support for multiple operating systems (Windows 95, Windows 98, Windows Me, Windows NT,
Windows 2000, and Windows XP)
• Easy configuration of the device with NETGEAR Print Server software that assures fast and easy
setup for Windows 95, Windows 98, Windows Me, Window NT, Windows 2000, and Windows
XP users.
• Web browser interface provides an easy way to configure the print server in a TCP/IP network
• Auto-sensing 10BASE-T/100BASE-TX Ethernet connection on the PS100 series Print Sever.
• One bi-directional parallel port on the PS100 series Print Sever.
• Compact size to fit into limited space in a work area.
• Wall- mounting holes for attaching the print server to a vertical surface
• Upgradeable BIOS Flash EPROM
The LEDs that indicate the status of the server, wired, and wireless LAN are located on the front
panels of the Model PS111W Print Sever, as illustrated bellow:
To Next Page
Loading...
Need help?
General
