NETGEAR PS101 User Manual

NetGear Print Server Manual
37
4-3 Setting Up Your PC to Recognize the Print Server
You must set up each PC that will print to the print server. Before proceeding, verify that:
• The print cable is connected to the printer port.
• The AC adapter is plugged into the wall socket.
• The Ethernet cable is plugged into the LAN, or the wireless MA 401 PC card is installed in PS100
Series Print Server.
Figure 4-9 NETGEAR Print Server software Icon

NETGEAR PS101 Specifications

General

Brand	NETGEAR
Model	PS101
Category	Print Server
Language	English