NETGEAR PS101 User Manual

NetGear Print Server Manual
47
ADDPORT Window (Epson Connection)
6. Click on No if you do not have an Epson Stylus Color printer attached to the port, and continue to
step 8.
Or
Click on Yes if you do have an Epson Stylus Color printer (or plan to install one). You must disable the
Epson printer.
To disable:
a. Click on the Program Files folder on your hard drive.
b. Start the Epson Spool Manager.
The Queue Setup window opens, as illustrated below. See Figure 4-19 Epson Spool Manager Queue
Setup Window.
Figure 4-19 Epson Spool Manager Queue Setup Window
c. Select Queue Setup, and click on Use Print Manager for this port.
d. Click on OK to exit the Queue Setup window.
The ADD PORT window, as illustrated in Figure 4-20 Add Port message, opens. This window informs you
that you have successfully added the port.

NETGEAR PS101 Specifications

General

Brand	NETGEAR
Model	PS101
Category	Print Server
Language	English