NETGEAR PTVU1000

66
4
4. Audio
This chapter describes the following topics:
• No Audio in HDMI Connection
• Audio Disappears After Link Disconnection
• Audio Does Not Switch to TV or Screen
• Setting Audio Output Device
• Video and Audio Synchronization
• Audio Control Using the PC Buttons
No Audio in HDMI Connection
Problem/Question:
No audio on the remote TV.
Symptom:
The system is connected and a movie is playing, but no sound is coming out of the TV
speakers.
Solution:
1. Install the media player recommended applications listed in Recommended Media
Player Applications on page 45.
2. Configure the media player as defined in Media Player Configuration on page 45.
3. You might need to manually configure the PC audio output, as described in Setting Audio
Output Device on page 67. Vista/Windows 7 users must configure the audio device for
either digital or analog output as described there.
4. Some TVs require you to select the audio input source—verify that digital audio source is
selected using the TV remote control.
5. Restart the media player after any change in the configuration of the system.