EasyManuals Logo

NETGEAR RAX120 User Manual

NETGEAR RAX120
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Table 1. LED descriptions (Continued)
DescriptionLED and Button
Solid white. The 2.4 GHz WiFi radio is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The 2.4 GHz WiFi radio is off.
2.4 GHz WiFi LED
Solid white. The 5 GHz WiFi radio is operating.
Blinking white. The router is sending or receiving WiFi traffic.
Off. The 5 GHz WiFi radio is off.
5 GHz WiFi LED
Solid white. A USB device is connected and is ready.
Blinking white. A USB device is plugged in and is trying to connect, or a file is
transferring to or from the USB device .
Off. No USB device is connected, or someone clicked the Safely Remove
Hardware button and it is now safe to remove the attached USB device.
USB port 1 LED
Solid white. A USB device is connected and is ready.
Blinking white. A USB device is plugged in and is trying to connect, or a file is
transferring to or from the USB device .
Off. No USB device is connected, or someone clicked the Safely Remove
Hardware button and it is now safe to remove the attached USB device.
USB port 2 LED
Solid green. A 5 Gbps or 2.5 Gbps connection is established.
Blinking green. The port is sending or receiving traffic at 5 Gbps or 2.5 Gbps.
Solid white. A 1 Gbps connection is established.
Blinking white. The port is sending or receiving traffic at 1 Gbps.
Solid amber. A 100 Mbps connection is established.
Blinking amber. The port is sending or receiving traffic at 100 Mbps.
.
Mulit-Gig Ethernet port LED
The LED color indicates the speed: white for Gigabit Ethernet connections and
amber for 100 Mbps or 10 Mbps Ethernet connections.
Solid white. The router detected a 1 Gbps link with a powered-on device.
Blinking white. The port is sending or receiving traffic at 1 Gbps.
Solid amber. The router detected a 100 Mbps or 10 Mbps link with a powered-on
device.
Blinking amber. The port is sending or receiving traffic at 100 Mbps or 10 Mbps.
Off. No device is connected to this Ethernet port.
Ethernet LEDs for ports 1–4
User Manual12Hardware Setup
Nighthawk AX12 12-Steam AX6000 WiFi Router

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR RAX120 and is the answer not in the manual?

NETGEAR RAX120 Specifications

General IconGeneral
WiFi Standard802.11ax
WiFi RangeVery large homes
Processor1.8GHz Quad-Core
MU-MIMOYes
BeamformingYes
USB Ports2 x USB 3.0
Memory512MB NAND Flash and 1GB RAM
WiFi TechnologyDual-Band WiFi 6 (802.11ax)
Antennas8 high-performance internal antennas

Related product manuals