NETGEAR RAX20 User Manual

Set your time zone
To set your time zone:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > NTP Settings.
The NTP Settings page displays.
5.
Select your time zone from the menu.
6.
If you live in a region that observes daylight saving time, select the Automatically
adjust for daylight savings time check box.
7. Click the Apply button.
Your settings are saved.
Set the NTP server
By default, the router uses the NETGEAR NTP server to sync the network time. You can
change the NTP server to your preferred NTP server.
To set the NTP server:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
User Manual105Manage Your Router
4-Stream AX1800 WiFi 6 Router Model RAX20

NETGEAR RAX20 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Dual Band	Yes
Maximum WiFi Speed	1.8Gbps
WiFi Performance	AX1800
USB Ports	1 x USB 3.0
Beamforming	Yes
MU-MIMO	Yes
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	4 x internal antennas
Security	WPA3
Memory	256MB RAM
Processor	1.5 GHz triple-core