For more information about the VPN configuration for the router, see Enable
OpenVPN service in the router on page 126.
6. Scroll down to the Clients will use this VPN connection to access section, and select
the Home Network only radio button.
This is the default setting. The VPN connection is only to your home network, not to
the Internet service for your home network.
7. Click the Apply button.
Your settings are saved.
Use VPN to remotely access a USB storage
device attached to the router
If you attach a USB storage device to a USB port on your router, after you make a VPN
connection from a remote VPN client device to your home router, you can access the
USB storage device. Because the router supports ReadySHARE, the USB storage device
might display as a ReadySHARE network device on your home router’s local LAN.
Note: On the remote VPN client, your home router might display as the remote router.
User Manual134Use OpenVPN to Access Your
Network
4-Stream AX1800 WiFi 6 Router Model RAX20
To Next Page
Loading...
Need help?
General
