EasyManuals Logo

NETGEAR RAX20 User Manual

NETGEAR RAX20
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
4. Select ADVANCED > Administration > NTP Settings.
The NTP Settings page displays.
5. Select an NTP server radio button:
•
Use the default NETGEAR NTP server: Use the preset NETGEAR NTP server.
•
Set your preferred NTP server: Use your preferred server.
6.
If you selected the Set your preferred NTP server radio button, enter the NTP server
domain name or IP address in the Server Address field.
7. Click the Apply button.
Your settings are saved.
Return the router to its factory default
settings
Under some circumstances (for example, if you lost track of the changes that you made
to the router settings or you move the router to a different network), you might want to
erase the configuration and reset the router to factory default settings.
To reset the router to factory default settings, you can use either the Reset button on
the back of the router or the Erase function.
After you reset the router to factory default settings, the user name is admin, the
password is password, the LAN IP address is 192.168.1.1 (which is the same as
www.routerlogin.net), and the DHCP server is enabled.
Note: If the router is in access point mode or bridge mode and you do not know the
IP address that is assigned to it, first try to use an IP scanner application to detect the IP
address. (IP scanner applications are available online free of charge.) If you can detect
the IP address, you don’t need to reset the router to factory default settings.
Use the Reset button
CAUTION: This process erases all settings that you configured in the router.
To reset the router to factory default settings:
1.
On the back of the router, locate the Reset button.
2.
Using a straightened paper clip, press and hold the Reset button for at least five
seconds.
User Manual106Manage Your Router
4-Stream AX1800 WiFi 6 Router Model RAX20

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR RAX20 and is the answer not in the manual?

NETGEAR RAX20 Specifications

General IconGeneral
WiFi TechnologyWiFi 6 (802.11ax)
Dual BandYes
Maximum WiFi Speed1.8Gbps
WiFi PerformanceAX1800
USB Ports1 x USB 3.0
BeamformingYes
MU-MIMOYes
Ethernet Ports4 x Gigabit LAN, 1 x Gigabit WAN
Antenna4 x internal antennas
SecurityWPA3
Memory256MB RAM
Processor1.5 GHz triple-core

Related product manuals