8.
Type a new admin password, confirm your new password, and set new security
questions and answers.
9. Click the Next button.
The page displays a confirmation.
10. Click the Login button.
A login window opens.
11. With your new password, log in to the router.
Always use HTTPS to access the router
You can configure the router to require HTTPS connections between your web browser
and the router web interface, for example, “https://www.routerlogin.net”. When you
enable the HTTPS requirement, connection requests to the router web interface that
specify HTTP are automatically converted to HTTPS.
Note: After you enable the HTTPS requirement, when you enter
http://www.routerlogin.net, your browser might display a security warning because
of the self-signed certificate on the router. This is expected behavior. You can proceed,
or add an exception for the security warning. For more information, visit
https://kb.netgear.com/000062980/what-to-do-incase-of-security-message.
To require HTTPS connections:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Web Services Management.
The Web Services Management page displays.
5. Select the Always Use HTTPS to Access Router check box.
6. Click the Apply button.
Your settings are saved.
User Manual95Manage Your Router
4-Stream AX1800 WiFi 6 Router Model RAX20
To Next Page
Loading...
Need help?
General
