Table 1. LED descriptions (Continued)
DescriptionLED and Button
•
Solid white. The Internet connection is ready.
•
Blinking white. The port is sending or receiving traffic.
•
Solid amber. An Ethernet cable is connected to the Internet port but Internet
is not accessible.
•
Off. No Ethernet cable is connected between the router and the modem.
Internet LED
•
Solid white. The WiFi radios are on. You can connect to the router's WiFi
network.
•
Off. The WiFi radios are turned off and you cannot use WiFi to connect to the
router.
WiFi LED
The LED color indicates the speed: white for Gigabit Ethernet connections and
amber for 100 Mbps or 10 Mbps Ethernet connections.
•
Solid white. The router detected a 1 Gbps link with a powered-on device.
•
Blinking white. The port is sending or receiving traffic at 1 Gbps.
•
Off. No device is connected to this Ethernet port.
Ethernet LEDs for ports 1–4
•
Solid white. A USB device is connected and is ready.
•
Blinking white. A USB device is plugged in and is trying to connect.
•
Off. No USB device is connected, or someone clicked the Safely Remove
Hardware button and it is now safe to remove the attached USB device.
USB LED
User Manual11Hardware Setup
4-Stream AX1800 WiFi 6 Router Model RAX20
To Next Page
Loading...
Need help?
General
