NETGEAR RAX20 User Manual

In the following steps, we refer to the list of blocked devices not currently connected
to the network as the list of blocked devices.
6.
To add a device to the list of blocked devices, do the following:
a. Click the Add button.
The Add Blocked Device page displays.
b.
Enter the MAC address and device name for the device that you want to block.
c. On the Add Blocked Device page, click the Apply button.
The device is added to the list of blocked devices.
7.
To remove a device from the list of blocked devices, do the following:
a.
Select the check box for the device.
b.
Click the Remove from the list button.
The device is removed from the list of blocked devices.
8.
To change the device status by allowing access for a device on the list of blocked
devices, do the following:
a.
Select the check box for the device.
b. Click the Edit button.
The Edit Device Name page displays.
c. From the Access Control menu, selected Allow.
d. On the Edit Device Name page, click the Apply button.
The device is moved to the list of allowed devices not currently connected to the
network.
9.
To change the device name for a device on the list of blocked devices, do the
following:
a.
Select the check box for the device.
b. Click the Edit button.
The Edit Device Name page displays.
c.
In the Device Name field, enter a name.
d. On the Edit Device Name page, click the Apply button.
The device name is changed on the list of blocked devices.
10. Click the Apply button.
Your settings are saved.
User Manual47Control Access to the Internet
4-Stream AX1800 WiFi 6 Router Model RAX20

NETGEAR RAX20 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Dual Band	Yes
Maximum WiFi Speed	1.8Gbps
WiFi Performance	AX1800
USB Ports	1 x USB 3.0
Beamforming	Yes
MU-MIMO	Yes
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
Antenna	4 x internal antennas
Security	WPA3
Memory	256MB RAM
Processor	1.5 GHz triple-core