EasyManuals Logo

NETGEAR RAXE500 User Manual

NETGEAR RAXE500
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
If your computer obtains its information from the router by DHCP, reboot the
computer and verify the gateway address.
You might be running login software that is no longer needed.
If your ISP provided a program to log you in to the Internet, you no longer need to
run that software after installing your router.
Troubleshoot Internet browsing
If your router can obtain an IP address but your computer is unable to load any web
pages from the Internet, it might be for the following reasons:
The traffic meter is enabled, and the limit was reached.
By configuring the traffic meter not to block Internet access when the traffic limit is
reached, you can resume Internet access. If your Internet service provider (ISP) sets
a usage limit, they might charge you for the overage.
Your computer might not recognize any DNS server addresses. A DNS server is a
host on the Internet that translates Internet names (such as www addresses) to numeric
IP addresses.
Typically, your ISP provides the addresses of one or two DNS servers for your use.
If you entered a DNS address during the router’s configuration, restart your computer.
Alternatively, you can configure your computer manually with a DNS address, as
explained in the documentation for your computer.
The router might not be configured as the default gateway on your computer.
Restart the computer and verify that the router address (www.routerlogin.net) is
listed by your computer as the default gateway address.
Changes are not saved
If the router does not save the changes that you make in the router web interface, do
the following:
When entering configuration settings, always click the Apply button before moving
to another page or tab, or your changes are lost.
Click the Refresh or Reload button in the web browser. It is possible that the changes
occurred, but the old settings might be in the web browser’s cache.
User Manual162Troubleshooting
Nighthawk AXE11000 Tri-Band WiFi 6E Router

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR RAXE500 and is the answer not in the manual?

NETGEAR RAXE500 Specifications

General IconGeneral
WiFi SpeedsUp to 10.8Gbps
WiFi BandsTri-Band
2.4GHz Band SpeedUp to 1.2Gbps
5GHz Band SpeedUp to 4.8Gbps
6GHz Band SpeedUp to 4.8Gbps
Processor1.8GHz Quad-Core Processor
Beamforming TechnologyYes
MU-MIMOYes
OFDMAYes
WiFi Technology802.11ax
Memory512MB NAND Flash and 1GB RAM
Ethernet Ports1 x 2.5Gbps WAN, 4 x 1Gbps LAN
USB Ports2 x USB 3.0
Antenna8 high-performance internal antennas
SecurityWPA3, VPN support
Weight2.86 lb (1.3 kg)

Related product manuals