NETGEAR RAXE500 User Manual

5.
Select the Default DMZ Server check box.
6. Type the IP address.
7. Click the Apply button.
Your settings are saved.
Change the Router’s Device Name
The router’s default device name is based on its model number. This device name
displays in the file manager when you browse your network.
To change the router’s device name:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
In the Device Name field, type a new name.
6. Click the Apply button.
Your settings are saved.
Change the LAN TCP/IP settings
The router is preconfigured to use private IP addresses on the LAN side and to act as
a DHCP server. The router’s default LAN IP configuration is as follows:
•
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
User Manual61Manage Network Settings
Nighthawk AXE11000 Tri-Band WiFi 6E Router

NETGEAR RAXE500 Specifications

General

WiFi Speeds	Up to 10.8Gbps
WiFi Bands	Tri-Band
2.4GHz Band Speed	Up to 1.2Gbps
5GHz Band Speed	Up to 4.8Gbps
6GHz Band Speed	Up to 4.8Gbps
Processor	1.8GHz Quad-Core Processor
Beamforming Technology	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
Memory	512MB NAND Flash and 1GB RAM
Ethernet Ports	1 x 2.5Gbps WAN, 4 x 1Gbps LAN
USB Ports	2 x USB 3.0
Antenna	8 high-performance internal antennas
Security	WPA3, VPN support
Weight	2.86 lb (1.3 kg)