EasyManuals Logo

NETGEAR RAXE500 User Manual

NETGEAR RAXE500
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #97 background imageLoading...
Page #97 background image
Ethernet ports 3 and 4 on your router, and then connect these port to the two aggregated
ports on the LAN device. If you do not configure port aggregation in this order, a network
loop occurs, and your network might be shut down.
WARNING: Do not connect an unmanaged switch to Ethernet ports 3 and 4 on your
router if these ports are aggregated. Otherwise, a network loop occurs, and your network
might be shut down.
Figure 8. Ethernet port aggregation to a LAN device
Set Up Ethernet Port Aggregation to a LAN Device
If you are connecting a LAN device such as a switch or NAS, make sure that your LAN
device supports 802.3ad LACP.
To set up Ethernet port aggregation to a LAN device:
1.
Set up Ethernet port aggregation on your LAN device before connecting it to your
router.
Note: If your LAN device supports a static link aggregation group (LAG) only, you
must enable static mode on your router before you connect your device to Ethernet
ports 3 and 4 on the router. See the following step for more information about how
to enable static mode on your router.
For information about how to set up Ethernet port aggregation on your router or
computer, see the documentation that came with your router or computer.
2. Log in to your router and enable Ethernet port aggregation:
a.
Launch a web browser from a computer or mobile device that is connected to
the router network.
b.
Enter http://www.routerlogin.net.
A login window opens.
c. Enter the router admin user name and password.
User Manual97Manage Network Settings
Nighthawk AXE11000 Tri-Band WiFi 6E Router

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR RAXE500 and is the answer not in the manual?

NETGEAR RAXE500 Specifications

General IconGeneral
WiFi SpeedsUp to 10.8Gbps
WiFi BandsTri-Band
2.4GHz Band SpeedUp to 1.2Gbps
5GHz Band SpeedUp to 4.8Gbps
6GHz Band SpeedUp to 4.8Gbps
Processor1.8GHz Quad-Core Processor
Beamforming TechnologyYes
MU-MIMOYes
OFDMAYes
WiFi Technology802.11ax
Memory512MB NAND Flash and 1GB RAM
Ethernet Ports1 x 2.5Gbps WAN, 4 x 1Gbps LAN
USB Ports2 x USB 3.0
Antenna8 high-performance internal antennas
SecurityWPA3, VPN support
Weight2.86 lb (1.3 kg)

Related product manuals