Manage the WiFi settings
The router and satellite come preset with the same WiFi network name (SSID) and the
same WiFi security. You can find the SSID and password on the router label and on the
satellite label. If you log in to the router and change the WiFi settings, the router
automatically sends the new settings to the satellite.
If you change your WiFi settings, make a note of the new settings and store it in a safe
place where you can easily find it.
If your computer or mobile device is using a WiFi connection when you change the
network name (SSID) or other WiFi security settings, you are disconnected when you
click the Apply button. To avoid this problem, use a computer with a wired connection
to access the router.
Enable or disable AX features for the 2.4 GHz
and 5 GHz band
AX features improve your network's capacity, Internet upload and download speeds,
and WiFi range by allowing WiFi traffic from different devices to be concurrently
managed.
AX features are enabled by default for the 2.4 GHz and 5 GHz band.
To enable or disable AX features for the 2.4 GHz or 5 GHz band:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the Enable AX section, select or clear the following check boxes:
User Manual52Specify Network Settings
Orbi Tri-band Mesh WiFi 6 System
To Next Page
Loading...
