5. Click the Browse button.
6. Locate and select the router firmware file you downloaded.
The firmware file name ends in .img.
7. Click the Upload button.
The upload process starts.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt
the upgrade. For example, do not close the browser, click a link, or load a
new page. Do not turn off the router.
When the upload is complete, your router restarts. The update process typically
takes about two minutes.
Change the admin password
This feature lets you change the default password that is used to log in to the router
with the user name admin. This password is not the one that you use to access the Orbi
WiFi network.
NOTE: Be sure to change the admin password to a secure password. The ideal
password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30
characters.
To set the password for the user name admin:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5. Type the old password, and type the new password twice.
6. To be able to reset the password, select the Enable Password Reset check box.
User Manual81Mantain and Monitor Your
Network
Orbi Tri-band Mesh WiFi 6 System
To Next Page
Loading...
