NETGEAR RBR660 - Enable Admin Password Reset; Reset the Admin Password

We recommend that you enable password reset.
7. Click the Apply button.
Your settings are saved.
Enable admin password reset
The router admin password is used to log in to your router web interface. We recommend
that you enable the password reset feature so that you can reset the password if it is
forgotten. This reset process is supported in Chrome, Safari, Firefox, Edge, and Internet
Explorer.
To enable password reset:
1. Launch a web browser from a computer or WiFi device that is connected to the
network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the admin user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5. Select the Enable Password Reset check box.
6. Select two security questions and provide answers to them.
7. Click the Apply button.
Your settings are saved.
Reset the admin password
If you set up the password reset feature, you can recover your router admin password.
NOTE: If you did not enable router password recovery, you must perform a
factory reset to set a new admin password. For more information, see Orbi router
hardware features on page 8.
User Manual82Mantain and Monitor Your
Network
Orbi Tri-band Mesh WiFi 6 System