NETGEAR RBR660 - Manually Update Firmware; Manually Update Satellite Firmware

Manually update firmware
If a satellite is connected to your router, you can log in to the router to manually upload
the firmware on your satellite.
WARNING: We recommend that you always update the firmware on your satellite
first, and then update your router. Also, do not update the firmware on your
router and satellite at the same time, and do not update more than one Orbi
device (router or satellite) at a time. If you need to update more than one Orbi
device, wait for the first Orbi device to finish updating before updating your next
Orbi device.
To manually update the firmware on your Orbi router and satellites, follow these
high level steps:
1. Visit netgear.com/support and download the firmware for both your Orbi router and
satellites.
2. Update the firmware on your Orbi satellites, one at a time.
For more information, see Manually update satellite firmware on page 79.
3. Update the firmware on your Orbi router.
For more information, see Manually update router firmware on page 80.
Manually update satellite firmware
We recommend that you update your satellites' firmware before you update the router’s
firmware.
To manually update your satellites' firmware:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Firmware Update > Manual Update.
The Firmware Update page displays.
5. Select the check box next to your satellite’s model name.
User Manual79Mantain and Monitor Your
Network
Orbi Tri-band Mesh WiFi 6 System