NETGEAR RBR660 - Manually Update Router Firmware

If you have more than one satellite, only update one satellite at a time. You must wait
for the first satellite to finish updating before updating the next satellite.
6. Click the Update button.
The Orbi satellite Firmware Update window displays.
7. If the browser asks you for the admin password, enter the same password that you
entered for the router.
8. Click the Browse button.
9. Locate and select the satellite firmware file that you downloaded.
The firmware file name ends in .img.
10. Click the Upload button.
The upload process starts.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt
the upgrade. For example, do not close the browser, click a link, or load a
new page. Do not turn off the satellite.
When the upload is complete, your satellite restarts. The update process typically
takes about two minutes.
Manually update router firmware
We recommend that you update your router’s firmware after you update the satellites'
firmware.
WARNING: Make sure that your satellites completes their firmware updates
before you update your router’s firmware.
To manually update your router’s firmware:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Firmware Update > Manual Update.
The Firmware Update page displays.
User Manual80Mantain and Monitor Your
Network
Orbi Tri-band Mesh WiFi 6 System