EasyManua.ls Logo

NETGEAR WAX610 - Page 170

NETGEAR WAX610
237 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The page shows four sections:
System Information section. The following settings are displayed:
- System Name. The access point NetBIOS name.
- System Mode. The access point system mode (AP).
-
LAN MAC Address. The MAC address of the LAN Ethernet port of the access
point.
-
Wireless MAC Address for 2.4 GHz. The MAC address of 2.4 GHz WiFi
interface (radio) of the access point.
-
Wireless MAC Address for 5 GHz. The MAC address of 5 GHz WiFi interface
(radio) of the access point.
-
Power Source. The type of power source (PoE 802.3at or Power Adapter).
-
Ethernet LLDP. The status of Ethernet LLDP feature (Enabled or Disabled).
-
LLDP Neighbour. The name of the LLDP neighbour, if any.
-
Country / Region. The country or region in which the access point operates
or for which the access point is licensed.
-
Current Firmware Version. The version of the firmware that is running on
the access point.
-
Backup Firmware Version. The version of the backup firmware on the access
point.
- Bootloader Version. The primary bootloader (U-Boot) version that is installed
on the access point.
-
Serial Number. The serial number of the access point.
User Manual170Monitor the Access Point and the
Network
Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual

Table of Contents

Other manuals for NETGEAR WAX610

Related product manuals