NETGEAR WAX610 - Page 187

The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 22.
The Dashboard page displays.
4.
Locate the alarm bell icon at the top-right of the page.
The icon shows a number, indicating the total number of new alarms and notifications
since the last time that you viewed alarms and notifications.
5. Click the alarm bell icon.
The pop-up window shows the alarms (indicated by a red bell) and notifications
(indicated by a blue bell) with a description and time.
6.
To view more alarms and notification, scroll down in the pop-up window.
User Manual187Monitor the Access Point and the
Network
Insight Managed WiFi 6 AX1800 Dual Band Access Point WAX610 User Manual