Installation Guide for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
Introduction 1-1
Chapter 1
Introduction
This chapter introduces the features, package contents, and appearance of the NETGEAR 108
Mbps Wireless PCI Adapter WG311T.
About the NETGEAR 108 Mbps Wireless PCI Adapter
WG311T
The NETGEAR 108 Mbps Wireless PCI Adapter WG311T gives you flexibility to install the PC in
the most convenient location available. The WG311T frees you from traditional Ethernet wiring
that is limited by cabling requirements.
Its auto-sensing capability allows high packet transfer up to 108 Mbps for maximum throughput or
dynamic range shifting to lower speeds due to distance or operating limitations in an environment
with a lot of electromagnetic interference.
The WG311T Wireless PCI Adapter provides reliable, standards-based 802.11g and b Wireless
Local Area Network (WLAN) connectivity that is protected with industry-standard security. In
addition, it offers the faster speeds of the soon-to-be ratified 802.11g standard. The WG311T
works with Windows 98SE, Me, 2000, and XP operating systems.
Key Features and Related NETGEAR Products
The WG311T Wireless PCI Adapter provides the following features:
• Reliable IEEE 802.11b standards-based wireless technology.
• Supports roaming between access points when configured in Infrastructure mode.
• 108 Mbps high speed data transfer. Wireless nodes negotiate to operate in the optimal data
transfer rate. In a noisy environment or when the distance between the wireless nodes is far,
the wireless nodes automatically fall back to operate at lower transfer rates.
To Next Page
Loading...
Need help?
General
