Installation Guide for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
2-14 Basic Setup
About Page
The About page displays important information about the NETGEAR 108 Mbps Wireless PCI
Adapter WG311T.
The About page shows the following information:
• Regional Domain: This is the region setting for the wireless adapter. The approved channels
for this region are automatically scanned. Governments regulate the channels used for wireless
transmission. Operating the wireless adapter in a different region may violate local laws.
• Driver Version: The wireless adapter driver version.
• Driver Date: The wireless adapter driver release date.
• MAC Address: The MAC address of this adapter. The Media Access Control address is a
unique 48-bit hardware address assigned to every network interface card. Some wireless
networks will restrict access based on a list of known MAC addresses. If you are
communicating with such a network, you would have to provide the address shown here to the
network administrator before you would be allowed to connect. Restricting access by MAC
address adds an obstacle against unwanted access to your network. However, unless you use
data encryption security, the data broadcast over the wireless link is fully exposed.
• IP Address: The IP address assigned to this adapter.
• Configuration Utility Software: The version and release date of this utility.
To Next Page
Loading...
Need help?
General
