NETGEAR WIRELESS-G ROUTER WGR614V10 User Manual

Wireless-G Router WGR614v10 Reference Manual
Fine-Tuning Your Network 5-10
v1.0, February 2010
To configure port triggering, you need to know which inbound ports the application needs. Also,
you need to know the number of the outbound port that will trigger the opening of the inbound
ports. You can usually determine this information by contacting the publisher of the application or
user groups or newsgroups.
To set up port triggering:
1. Select Port Forwarding/Port Triggering under Advanced in the main menu. The
Forwarding/Port Triggering screen displays.
2. Select the Port Triggering radio button. The port triggering information displays.
3. Clear the Disable Port Triggering check box.
Figure 5-3
Note: If the Disable Port Triggering check box is selected after you configure port
triggering, port triggering is disabled. However, any port triggering
configuration information you added to the router is retained even though it is
not used.

NETGEAR WIRELESS-G ROUTER WGR614V10 Specifications

General

Brand	NETGEAR
Model	WIRELESS-G ROUTER WGR614V10
Category	Wireless Router
Language	English