NETGEAR WN2000RPTv3 User Manual

Extender Network Settings
22
N300 WiF Range Extender
Disable or Enable the WiFi Radio
By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz band. If you disable
the WiFi radios, then no one can connect with WiFi to the extender.
 To disable or enable the WiFi radios:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
4. Click the Menu icon
.
The extender menu displays.
5. Select Settings > W
iFi.
6. Select or clear the Enable 2.4 GHz WiFi check box.
7. Click the SA
VE button.
Your settings are saved.
Change the WiFi Speed
 To change the WiFi speed:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
3. When prompted, enter your email address and password.

NETGEAR WN2000RPTv3 Specifications

General

Brand	NETGEAR
Model	WN2000RPTv3
Category	Extender
Language	English