Maintain and Monitor the Extender
36
N300 WiF Range Extender
Restore the Configuration Settings
You can restore the configuration file of the extender to a previously saved configuration file.
ļ To restore the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web
browser
.
2. In the address field of your browser
, enter www.mywifiext.net.
3. When prompted, enter your email address and password.
4. Click the Menu icon
.
The extender menu displays.
5. Select Settings > Other.
6. Click the BROWSE button.
7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_WN3000RPv3.cfg.
CAUTION:
After you click the RESTORE button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting!
8. Click the REST
ORE button.
A confirmation pop-up window opens.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.
To Next Page
Loading...
Need help?
General