NETGEAR WNA3100M User Manual

Maintenance
17
NETGEAR N300 Wireless Mini USB Adapter WNA3100M
I cannot connect to a wireless network.
• Make sure that your wireless-N USB adapter is inserted securely into the USB port on
your computer or the USB cable if you are using it. The wireless-N USB adapter LED
should light up or blink (see Status LED on page 5 for details).
• Click the icon to open NETGEAR Genie. The home screen shows the following
screen if the adapter cannot connect to the network that you selected.
• If the network uses wireless security, you need to either know the wireless security
settings or use Push 'N' Connect if the network supports WPS. Some networks also
restrict use to only computers or wireless devices with known MAC addresses. If that is
the case, on the NETGEAR Genie screen, click Other to find the MAC address for your
wireless-N USB adapter and provide it to the network administrator.
Downloaded from www.vandenborre.be

NETGEAR WNA3100M Specifications

General

Interface	WLAN
Connectivity technology	Wireless
Ethernet LAN (RJ-45) ports	0
Chipset	-
Internal	No
Product color	Black
Wi-Fi band	Single-band (2.4 GHz)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Compatible operating systems	Microsoft Windows 7, XP, Vista: (32/64-bit)
Windows operating systems supported	Yes

Weight and Dimensions

Depth	34 mm
Width	16 mm
Height	8 mm
Weight	4 g