Maintenance
19
NETGEAR N300 Wireless Mini USB Adapter WNA3100M
• If you do not have a USB 2.0 port on your computer, the throughput is limited to the 14
Mbps of the older USB 1.1 standard.
How can I view the IP address for the wireless-N USB adapter?
Click the
icon to open NETGEAR Genie. Then click the Other button to view the IP
address.
No IP address is assigned to the wireless-N USB adapter.
This can occur if you upgraded your wireless-N USB adapter software and did not reboot
your computer. Either restart your computer, or connect to a different access point.
Downloaded from www.vandenborre.be
To Next Page
Loading...
