NETGEAR WNCE2001 User Manual

Universal WiFi Internet Adapter WNCE2001 User Manual
1-2
v1.0, April 2010
3. Connect the WNCE2001 to power by either plugging it directly into a wall outlet, or by
connecting it to any USB port using the included USB power cable. For more information on
power connection options, see “Power Connection Options” on page 1-4.
4. Push the WPS button on the WNCE2001.
The WLAN LED will blink amber and green, showing that the WPS is running.
5. Push the WPS button on your router. The WLAN LED on the WNCE2001 will stay green for
5 seconds when the wireless connection has been established.
6. Your installation is complete.
Installation without WPS
To install your WNCE2001 without WPS, do the following:
1. Disconnect any wireless connection to the router and/or remove the Ethernet cable currently
connected to the computer. (You may restore the connection after theWNCE2001 installation
is complete.)
Figure 1-2

NETGEAR WNCE2001 Specifications

General

Bandwidth	2.4 GHz
Ethernet LAN	Yes
Security algorithms	WEP, WPA-PSK, WPA2-PSK
Maximum data transfer rate	300 Mbit/s
Interface	USB
Connectivity technology	Wireless
Internal	No
Product color	Black
Weight (imperial)	2.12 lbs
Dimensions (WxDxH)	62 x 17.9 x 81.3 mm
Compliance industry standards	IEEE 802.11 b/g/n
Dimensions (W x D x H) (imperial)	3.2 x 2.44 x 0.7 \

Weight and Dimensions

Weight	60 g