NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0 Adapter User Manual

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
1-6
v1.0, June 2009
Connecting to a Wireless Network
If you installed the Smart Wizard, you can use the WNDA3100v2 software to connect to a wireless
network.
Smart Wizard, by Install Assistant
If you selected the by Install Assistant radio button during installation, you are prompted to
connect wirelessly with one of the following screens:
1. Follow the on-screen prompts to connect to a wireless network:
• If your router supports WPS and you want to use WPS to create a secure connection, leave
the radio button selected, and click Next to continue. Follow the Smart Wizard steps to
connect using WPS.
• If your router does not support WPS, select your wireless network name from the list of
wireless networks and click Next to continue. (If your wireless network has implemented
security, you need to know which type of security (WEP, WPA-PSK, or WPA2-PSK) and
you need the passphrase to complete your setup.
Figure 1-3
Note: If you are not sure if your router supports WPS, select No to connect. If your router
does not support WPS and you select Yes, the router or access point connection
will time out and no wireless network connection will be established.
WPS-capable networks in your area No WPS-capable networks in your area
Hidden
network

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0 Adapter Specifications

General

Brand	NETGEAR
Model	WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0 Adapter
Category	Adapter
Language	English