NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
2-6
v1.0, June 2009
7. Within 2 minutes, return to the wireless-N USB adapter. Either press the WPS button on your
wireless-N USB adapter, or click the WPS button on the WNDA3100v2 Smart Wizard
screen.
The wireless-N USB adapter security is set to WPA-PSK [TKIP]. Some WPS routers support
WPA2-PSK [AES], with the same SSID and passphrase. You can change the adapter to
WPA2-PSK [AES] using the Security setting in the Settings screen.
8. You can use the Status Bar to verify your network connection. For more information, see
“Smart Wizard Status Bar” on page 1-11. Click Close to exit the Smart Wizard.
Using a PIN to Connect to a Wireless Network
You can either use the router or access point’s PIN; or the wireless-N USB adapter can generate a
PIN to connect to the router or access point.
To use a PIN to connect to an access point or router:
1. Click the icon to open the Smart Wizard of the wireless-N USB adapter.
Figure 2-4
To Next Page
Loading...
